Performance carbon fibre exhaust for CBR250RR, all years. Straight bolt on for the CBR250RR, but can be used on virtually any 250cc with a free adaptor available upon request.
This pipe has a glossy finish and looks and sounds awesome. It comes with new brace, gasket and bolts for a smooth installation.
The pipe weights 1.2 Kg less than stock pipes! It is 100mm in diameter and 420mm long. We also have the shortie version, which is 300mm long.
Please note, this is not a Yoshimura pipe. It is just a good quality aftermarket pipe. There are 2 Yoshimura stickers with each pipe, for decoration purposes only. You may apply the stickers on the muffler, fairings, swing arm, or just anywhere you like.
The adaptor for the MC19 and other 250cc has to be installed by a mechanic, or someone with welding skills. It is not a plug-n-play adaptor, it requires a small modification to the extractor of your bike. You can see the photos of the conversion process on our Facebook page.
The adaptor is not necessary on the CBR250RR (MC22). If you need an adaptor, make sure you send us an email asking for one. Otherwise, we only post the exhaust with the brace, bolts and Yoshi stickers.
Check out the videos of the muffler installed on the section "Product Videos" below.
XCite Bikes XT420CF carbon fiber muffler for the Honda CBR250RR
XCite Bikes ca...XCite Bikes XT420CF carbon fiber muffler for the Honda CBR250RR
Posted by Ron Jones on 7th Oct 2020
Muffler arrived quickly in the post. Noticed some surface rust on the inside when unpacking, but nothing serious. Fitting was reasonably easy although the threaded holes in the new muffler didn`t line up properly with the MC22 exhaust flange. (Too widely spaced. ) A bit of drilling fixed the problem and all was well. Bike goes well sounds good. Muffler is much lighter than stock, and looks better. Value for money.
CARBON MC22 PIPE
Posted by Nick on 27th Jul 2020
Killer sound over the standard pipe but not offensively loud. Raspy like a yoshi pipe. Comes with fitting hardware and super fast post. Xcite bikes FTW!
Looks good but fit was off
Posted by James on 19th Mar 2020
Fit wasn't great. Had to take to shop to file the flange.
The holes on muffler didn't line up very well and were off by a few mm's.
Posted by James on 18th Jan 2020
Yet to fit but looks great and arrived quickly.
Looks good and sounds great
Posted by Unknown on 6th Aug 2018
Fast delivery and well packaged. Easy to install on mc22 with all pieces provided. Looks great. Sounds even better. Excellent product for low price
Cbr250rr 42cm pipe
Posted by Nik on 3rd Oct 2017
Looks great sounds great
Easy to install if you are mechanically minded.
All lines up well
Awesome pipe for $$$
Posted by Reg on 29th Jun 2016
Awesome sound, looks clean, had no trouble whatsoever installing on my mc19
Excellent exhaust for the price
Posted by David on 1st Feb 2016
The exhaust looks good and sounds surprisingly deep, without being offensively loud. It is close to the swingarm, but so was the standard exhaust. It fitted up perfectly; for the price it's a really good choice.
Posted by Unknown on 1st Sep 2015
When receiving the package it look well packed and maintained nicely. But when it came to try and fit the exhaust on, one of the holes didn't line up properly and the last bolt went in wonky. When getting the last bolt in, the ran like a charm and did it's job
Posted by Scott on 26th Aug 2015
The exhaust itself looks good and sounds good. Issues i had were the holes are not drilled 100% in exhaust the same spot as factory. Which made it extremely difficult to get one of the new bolts in. It ended up going in on a slight angle. Also there is very very very minimum clearance between the exhaust and the swingarm, around 1mm.
XCite Bikes staff: Thanks for your feedback. Indeed, if the exhaust is not installed straight, it might get close to the swing arm. If the pipe is not sitting straight, the extractor flange might be slightly bent, or the gasket might be on the way. It's very important to mount the pipe properly in order to get a perfect installation.